• Threaded bulkhead with 3/4″ Female National Pipe Thread (NPT-F)
• Can be installed in a tank that has an opening big enough for the fitting to pass into
• Can be installed for wall thicknesses of up to ~3/4″ thick
• EPDM Gaskets are standard.

• Threaded bulkhead with 1″ Female National Pipe Thread (NPT-F)
• Can be installed in a tank that has an opening big enough for the fitting to pass into
• Can be installed for wall thicknesses of up to ~3/4″ thick
• EPDM Gaskets are standard.

• Threaded bulkhead with 1 1/2″ Female National Pipe Thread (NPT-F)
• Can be installed in a tank that has an opening big enough for the fitting to pass into
• Can be installed for wall thicknesses of up to ~3/4″ thick
• EPDM Gaskets are standard.

• Threaded bulkhead with 2″ Female National Pipe Thread (NPT-F)
• Can be installed in a tank that has an opening big enough for the fitting to pass into
• Can be installed for wall thicknesses of up to ~3/4″ thick
• Compatible with 2″ siphon Tube for some applications (QMP Part #20090-1)
• EPDM Gaskets are standard.

• Bolted bulkhead with 2″ Female National Pipe Thread (NPT-F)
• Can be installed in a tank that has an opening big enough for the fitting to pass into
• Bulkhead will sandwich the plastic wall together with it’s two gaskets to provide a very strong seal
• Can be installed for wall thicknesses of up to ~1″ thick
• Compatible with 2″ siphon Tube for some applications (QMP Part #20090-1)
• EPDM Gaskets are standard.

• Bolted Bulkhead with 2″ Female National Pipe Thread (NPT-F)
• Can be installed in a tank that has an opening big enough for the fitting to pass into
• Comes with custom longer bolts to span thicker tank walls
• Can be installed for wall thicknesses of up to ~1.25″ thick
• Compatible with 2″ siphon Tube for some applications (QMP Part #20090-1)
• EPDM Gaskets are standard.

• Stainless Steel Bulkhead with 2″ Female National Pipe Thread (NPT-F)
• Stainless Steel for custom applications where plastic cannot be used
• Can be installed in a tank that has an opening big enough for the fitting to pass into
• Can be installed for wall thicknesses of up to ~1.25″ thick
• Compatible with 2″ siphon Tube for some applications (QMP Part #20090-1)
• EPDM Gaskets are standard.

Click Here to see MSRP in QMP pricelist.

• Bulkhead with 3″ Female National Pipe Thread (NPT-F)
• Can be installed in a tank that has an opening big enough for the fitting to pass into
• Can be installed for wall thicknesses of up to ~1″ thick
• Compatible with 3″ siphon Tube for some applications (QMP Part #20091-1)
• EPDM Gaskets are standard.

• Bolted Bulkhead with 3″ Female National Pipe Thread (NPT-F)
• Can be installed in a tank that has an opening big enough for the fitting to pass into
• Can be installed for wall thicknesses of up to ~1″ thick
• Compatible with 3″ siphon Tube for some applications (QMP Part #20091-1)
• EPDM Gaskets are standard. Viton Gaskets available.

• Bolted Bulkhead with 3″ Female National Pipe Thread (NPT-F)
• Can be installed in a tank that has an opening big enough for the fitting to pass into
• Comes with custom longer bolts to span thicker tank walls
• Can be installed for wall thicknesses of up to ~1.25″ thick
• Compatible with 3″ siphon Tube for some applications (QMP Part #20091-1)
• EPDM Gaskets are standard. Viton Gaskets available.

• Stainless Steel Bulkhead with 3″ Female National Pipe Thread (NPT-F)
• Stainless Steel for custom applications where plastic cannot be used
• Can be installed in a tank that has an opening big enough for the fitting to pass into
• Can be installed for wall thicknesses of up to ~1.25″ thick
• EPDM Gaskets are standard.

• Two part lid consists of female threaded ring (installed on hole in tank) and male threaded lid
• Female threaded ring has stainless steel screws to drill into the tank wall, which allows the lid to be threaded on
• Lid is vented

• Two part lid consists of female threaded ring (installed on hole in tank) and male threaded lid
• Female threaded ring has stainless steel screws to drill into the tank wall, which allows the lid to be threaded on
• Lid is not vented

Click Here to see MSRP in QMP pricelist.

• Two part lid consists of female threaded ring (installed on hole in tank) and male threaded lid
• Female threaded ring has stainless steel screws to drill into the tank wall, which allows the lid to be threaded on
• Lid is vented

Click Here to see MSRP in QMP pricelist.

• Two part lid consists of female threaded ring (installed on hole in tank) and male threaded lid
• Female threaded ring has stainless steel screws to drill into the tank wall, which allows the lid to be threaded on
• Lid is not vented

• Two part lid consists of female threaded ring (installed on hole in tank) and male threaded lid
• Female threaded ring has stainless steel screws to drill into the tank wall, which allows the lid to be threaded on
• Lid is vented

Click Here to see MSRP in QMP pricelist.

• Two part lid consists of female threaded ring (installed on hole in tank) and male threaded lid
• Female threaded ring has stainless steel screws to drill into the tank wall, which allows the lid to be threaded on
• Lid is not vented

Click Here to see MSRP in QMP pricelist.

• Two part lid consists of female threaded ring (installed on hole in tank) and male threaded lid
• Female threaded ring has stainless steel screws to drill into the tank wall, which allows the lid to be threaded on
• Lid is vented

• Lid is hinged so it cannot become removed or lost
• Lid is screwed into the tank wall with stainless steel screws
• Lid is vented

• Lid is hinged so it cannot become removed or lost
• Lid is equipped with a lockable clasp, to prevent opening the tank without permission
• Lid is screwed into the tank wall with stainless steel screws
• Lid is vented

Click Here to see MSRP in QMP pricelist.

• Two part lid consists of female threaded ring (installed on hole in tank) and male threaded lid
• Female threaded ring has stainless steel screws to drill into the tank wall, which allows the lid to be threaded on
• Lid is not vented

Click Here to see MSRP in QMP pricelist.

• Two part lid consists of female threaded ring (installed on hole in tank) and male threaded lid
• Female threaded ring has stainless steel screws to drill into the tank wall, which allows the lid to be threaded on
• Lid is vented

• Lid is hinged so it cannot become removed or lost
• Lid is equipped with a lockable clasp, to prevent opening the tank without permission
• Lid is screwed into the tank wall with stainless steel screws
• Lid is vented

• 2″ Threaded replacement cap

• 3″ Threaded replacement cap

Click Here to see MSRP in QMP pricelist.

• 5″ Threaded Replacement cap
• Same cap used on QMP document tube (#60117-1)

Click Here to see MSRP in QMP pricelist.

• 7″

Click Here to see MSRP in QMP pricelist.

• 9″ Threaded Replacement cap

• 12″ Plastic Mesh Screen/Strainer
• Fits inside 12″ Vented (Part #30005-1)/Non-vented (Part #30026-1) lids

Click Here to see MSRP in QMP pricelist.

• 15″ Plastic Mesh Screen/Strainer
• Fits inside 16″ Vented (Part #30006-1, 30013-1, 30028-1)/Non-vented (Part #30019-1) lids

Click Here to see MSRP in QMP pricelist.

• Siphon tubes are used for applications that require access to pull water/fluid from the bottom of a tank
• Fits all QMP 2″ NPT-F bulkhead fittings

Click Here to see MSRP in QMP pricelist.

• Siphon tubes are used for applications that require access to pull water/fluid from the bottom of a tank
• Fits all QMP 2″ NPT-F bulkhead fittings

• Electrical Cord Grommet used for sealing a sump pit (Part # 60162-3)
• Replacement grommet for sump pits (#60162-2)

• Grommet has cut-outs sized to 1 1/4″ pipe, 1 1/2″ pipe, and 2″ pipe(
• Grommet used for sealing a sump pit (Part # 60162-3)
• Replacement grommet for sump pits (#60162-2)

• Tank Float is weighted for oilfield use